Product Info
Description…
The Series S Kit is a fantastic new starter kit primarily for customers looking for a realistic smoking sensation. It offers unrivalled build quality and performance in a sleek and up market design.
The Series S Kit comes complete with MTL tight draw coils but can also use DTL (direct to lung) inhale coils to give users a variety of different ways to use the kit. GQ Magazine’s pick for one the ‘Top 10 Coolest Things in the World’. It doesn’t matter if you’re brand new to vaping or a seasoned sub ohm fan looking for a discrete option, the Series S does it all. It’s also the first Kit That Ziggicig has been able to supply with a 6-month Warranty. A first for the Vaping industry
S17 Series Battery
These batteries have an impressive 900mAh capacity cell inside its tiny frame, the S17-Battery is sub-ohm capable and will work with coils rated as low as 0.5Ω. Designed to go best with the matching S-Tank, though any 510 atomiser can be used.
S17 Series Tank
The Jac Vapour Series S-17 Tank is a good choice of tank for both newcomers and more advanced vapers because it comes supplied with a choice of coils for mouth to lung or direct to lung vaping. The tank is top filling, 510 thread and has a 1.8ml capacity. This tank is very versatile with 3 different coil options for MTL and DL vapers in mind.
Set up procedure
To set up your new SERIES-S17 kit, unscrew the tank from the battery and set the battery aside.
Then, keeping a grip on the textured ring at the very end of the tank, unscrew the base. The base is the part that contains the adjustable airflow hole. Take a fresh coil, place it on the base and screw it on tightly. Make sure it is tightened enough and does not move, as this could cause leaking or prevent a proper connection, which will result in your SERIES-S17 not producing any vapour.
You can then prime your coil by dripping some of your favourite e-liquid into the centre of the coil. Alternatively, leave it right-way-up after filling for around 10 minutes before using your SERIES-S17. This ensures that all the wick is saturated with liquid and will not burn dry, which can produce an unpleasant, burnt taste.
S-Coils should be replaced after you have filled up your tank approximately 10 times. Two S-Coils are available for the SERIES-S17: Mouth To Lung and Direct Lung. The Mouth To Lung coils are designed to mimic the feeling of smoking, where you inhale into your mouth and then into your lungs. The Direct Lung coils feel more 'open' when you inhale, and are designed for long, deep draws directly into your lungs.
Next, you need to fill your tank.
If you are using the older 'bottom-fill' style S17 tank:
Take the top part of the tank and turn it upside-down so that the mouthpiece points downward. Fill with your preferred e-liquid, but be careful to not put any down the centre pipe which leads to the mouthpiece (“drip tip”), as it will flow directly out of the tank and waste your liquid. Instead, carefully fill your tank around the centre post, until the liquid is just below the top of this post. Screw the base back onto the tank
If you are using the new 'topfill' S17 tank:
Once you've installed the coil, screw the top and bottom parts of the tank back together. Then, unscrew the mouthpiece from the top of the tank, and squeeze your e-liquid into the filling holes at the side, being careful not to get any into the centre tunnel as this may flood your coil.